产品特性:控制 | 是否进口:否 | 产地:乐清 |
品牌:英勒科 | 系列:HZH | 型号:HZH-220VAC-2H-1H1D-1D |
额定电流:5A | 整定电流:1A | 安装方式:导轨安装 |
灭弧介质:2kV | 额定电压:220V | 主触头极数:转换 |
线圈电压:220V | 最小包装数:1 | 物料编号:202303010116 |
用途:控制保护 | 应用场景:电厂、矿山 | 保护类型:监视 |
HZH系列综合控制继电器适用于直流或交流操作的各种自动控制线路中,可以直接控制分闸回路、合闸
回路,监视控制电源,具有电源指示和动作指示,方便调节合闸延时,电源监视断电延时。体积小,功能强大,适合安装于小型抽屉柜中。(适用于交流50/60Hz)
Employed in various AC/DC automatic control lines, HZH series of control relays can directly controlopening and closing circuits and supervise control power.Complete with indicators for power and operateactions,the controlrelays can easily adjust delay in closing and that in power cut in the supervision of power supply. Small in size,HZHseries of control relays can be installed in small drawers.(Are used in AC 50/60Hz)
额定电压NominalVoltage:110V、220V(AC/DC)
动作值Operate Value:(DC)≤75%额定电压NominalVoltage
(AC)≤85%额定电压 NominalVoltage
返回值ReleaseValue:≥10%额定电压NominalVoltage
动作时间ActingTime:≤15ms
返回时间 ReturnTime:分闸回路 Opening Circuit:≤15ms
合闸回路Closing Circuit:60mS~160S
电源监视回路PowerSupervisionCircuit:60mS~160S
功耗Power Consumption:≤5W
触点容量Contact Capacity:在电压不大于250V时:触点长期接通电流为5A;在电压不大于250V时:电路时间常数L/R为5mS的
直流电路中,触点断开容量为50W;在电压不大于250V时:功率因数COS6为0.4的交流电路中,触点断开容量为250VA。
When the voltage is less than 250V,the continuous current o f the contacts is 5A; When the voltage is less than 250 and time constant L/R is 5mS in the DC circuit, the switching capacity of the contacts is 50W;When the voltage is less than 25OVand thepower factor COSbis 0.4 in the AC circuit, the switching capacity of the contacts is 250VA.
介质强度DielectricStrength:继电器各引出端子与外壳之间,应能承受50Hz、2KV,历时1分钟耐压试验而无击穿或闪络现象
50Hz, 2KV, 1 minute between each of the contactsand the casing, and no sign of breakdown or flashoveris detected.
环境温度AmbientTemperature:-25°C~55C
U型35导轨安装 Mounting On profile railTypeU 35
HZH一220VAC 一2H-1H1D一 1D
① ② ③ ④ ⑤
①HZH系列综合控制继电器HZH Series of ControlRelays
②额定电压NominalVoltage:85V~264V(DC/AC)
③合闸回路触点形式ContactType for Closing Circuit:1H、1D、2H、2D、1H1D
④分闸回路触点形式ContactTypefor Opening Circuit:1H、1D、2H、2D、1H1D
⑤)电源监视回路触点形式ContactType for PowerSupervision Circuit:1H、1D、2H、2D、1H1D
五、外形尺寸图