| 产品特性：控制 | 是否进口：否 | 产地：乐清 |
| 品牌：英勒科 | 系列：HRTH | 型号：HRTH-2Z-X-T |
| 额定电流：*** | 整定电流：1A | 安装方式：导轨安装 |
| 灭弧介质：2kV | 额定电压：220V | 主触头极数：转换 |
| 线圈电压：220V | 最小包装数：1 | 物料编号：20230308116 |
| 用途：控制保护 | 应用场景：电厂、矿山 | 保护类型：监视 |
HRTH系列合位跳位监视继电器专用于开关合位跳位监视、电源监视、断路器监视。本产品工作电流小，能监视所有开关、断路器.(适用于交流50/60Hz)
本系列继电器工作电压通用性强;返回系数高;功耗低;抗干扰性能很好。
HRTH series of kickdown and power supply superv***ry relays are used for the monitoring of kick downswitch, power supply, and circuit breaker. With low operating current, the relay can monitor the functioning of all the switches and circuit breakers. (Are used in AC 50/60Hz)
This series of relays are characterized by flexibility in operate voltage, high return coefficien t, lowpower consumption, and goodanti-interference performance.
额定电压NominalVoltage:80VDC~300VDC(二组触点可降低到50VDC~300VDC)
(can be reduced to 50VDC~300VDCfortwo groupsof contact)
额定电流NominalCurrent:4~6mA
功耗 Power Consumption: ≤1.3W
触点容量Contact Capacity:250VDC/0.1A
介质强度Dielectric Strength:继电器各引出端子与外壳之间，应能承受50Hz、2KV，历时1分钟耐压试验而无击穿或闪络现象
50Hz, 2KV, 1 minute between each of the contactsand the casing, and no sign of breakdown or flashover is detected.
环境温度AmbientTemperature:-25C~55C
U型35导轨安装Mounting On profile railTypeU 35
HRTH一Y一2H2D一 X一T
① ② ③ ④ ⑤
① HRTH系列合位跳位监视继电器
HRTH Series Of Kickdown and Power Supply Superv***ry Relays
②Y:工作电压为直流 DC Operate Voltage
J:工作电压为交流AC Operate Voltage
③触点形式 ContactArrangement:2H2D、2Z
④X:小信号Small signal:≤1mA(常规型请省略 Conventional models omit filling)
⑤T:带延时功能，With delay function:20mS~0.5S
五、外形尺寸图
